WhatsApp / Wechat：+86 18150087953 / +86 18005022138
Email：
Description
Product description
The IC660BBD110 module is designed to provide 16 discrete input points for GE Programmable logic controller(PLC)systems.
trait
The threshold is optional
On/off thresholds for each set of eight inputs
Configurable on/off thresholds range from 25%to 85%of the incoming line voltage
Advanced diagnosis
Fault reporting can be enabled or disabled circuit by circuit
GE Fanuc Genius IC660BBD110 115 VAC 16 Circuit Discrete Input module is an intelligent configurable module that interfaces to 115 VAC discrete input sensors.The module has 16 115 VAC circuits-two sets of 8 circuits each.
The typical input for this block is the contact closure of a switch,button,or limit switch.The block can be used with 2-and 3-wire proximity switch inputs.The control power supply for this module comes from the power cord that provides the input.No separate block power supply is required.
The GE Fanuc IC660BBD110 is a standalone block I/O with sixteen(16)input points.The module supports the Genius bus communication protocol,allowing it to be installed near the machine without the need to install a backboard,processor,or communication adapter along the module.The module is an intelligent input module that supports Daisy chain topology and reports directly to controllers or communication adapters connected to the same network.
The IC660BBD110 input channel is designed to receive signals in the voltage range 93-132VAC,frequency 47-63 Hz,and nominal value 115VAC.For both ON and OFF states,the programmable threshold ranges from 25%to 85%.The module is also equipped with an internal channel diagnostic function,capable of detecting open and short-circuited wires.Both diagnostic attributes also have programmable thresholds of 25-85%and fixed thresholds of 10-90%,respectively.The module has an input processing time of 1 ms and a software-configurable input filter of 10 to 100 ms in increments of 10 ms.The input filter can suppress noise and signal rebound.
The IC660BBD110 module measures 8.83 inches(22.44 cm)x 3.34 inches(8.48 cm)x 3.91 inches(9.93 cm)(height x width x depth)and weighs 4 pounds.(1.8 kg).It is equipped with LED indicators such as unit normal,I/O enabled and separate input LED.It has 1500V internal isolation from ground to serial bus.
The IC660BBD110 is connected to the Genius bus via a terminal block mounted below the module LED indicator.The terminal is a 3-pin terminal and can be accessed by opening the hinged door.The module can be mounted face up or upside down.
The IC660BBD110 discrete input module has advanced diagnostic capabilities and selectable thresholds.Some of the most common input contacts close connections with devices such as switches,limit switches,and buttons.It can be connected to 2-wire proximity switch inputs and 3-wire proximity switch inputs.
The GE Fanuc Genius IO IC660BBD110 discrete input block operates safely at full power in a temperature range of 32 to 140 degrees Fahrenheit(0 to 60 degrees Celsius)and can be safely stored in a temperature range of-40 to 100 degrees Celsius.212 degrees Fahrenheit(-40 to 100 degrees Celsius).The IC660BBD110 discrete input block has a safe ambient humidity level between 5%and 95%during operation and storage,with no condensation.The input block weighs 4 pounds or 1.8 kilograms.It measures 8.8 x 3.3 x 3.9 inches(22.4 x 8.4 x 9.9 cm).For device protection,the IC660BBD110 discrete input block can be configured with software to detect short and open circuit faults.
Application field
The IC660BBD110 GE 16-point discrete input module is usually used in industrial automation,process control,mechanical equipment and other fields,and can be used in conjunction with the control system to achieve the acquisition and processing of discrete input signals.
IC660BBD110 GE
IC660BBD110 GE
IC660BBD110 GE
