IC660BBA104 6231BP10910 GE Current Source Analog I/O Block

　　Product Description

　　IC660BBA104 is a current source analog I/O block that can be used in various industrial applications.

　　Features

　　Reliable and accurate current source

　　Wide range of current output options

　　Easy to integrate with existing systems

　　General Electric FANUCIC60BA106 is a frequent source analog input and output block.This module consists of six(6)circuits,consisting of four(4)4-20MA input channels and two(2)4-20MA output channels.It is an external power supply voltage of 115VAC with a separate isolated input channel.

　　IC660BBA104 is a flow source combination I/O block with six(6)input circuits,consisting of four(4)analog input channels,capable of receiving 4-20mA signals and two(2)output channels,transmitting 4-20mA signals.In addition,the module also has input channels for group isolation,group isolation,and group isolation,rated at 1500V.

　　The specific characteristics of the IC660BBA104 input channel are:a full scale reading accuracy of 0.1%at 25 degrees Celsius,a resolution of 16.6MS to 400MS for 1a,and a user configurable conversion time of 16.6M to 25MA.Each input channel is designed with a single diagnosis,such as low/out of range,high/low alarm,and open line detection.

　　The accuracy of the IC60BBA104 output channel is 0.15%of the full scale reading,with a resolution of 6 times.The typical update frequency for each channel is 6 to 8M,exceeding 0-24MA.Similar to the input channel,each output channel can perform internal diagnostics such as low distance,out of range,and feedback errors.

　　The external power supply of IC660BBA104 is supplied by a nominal input of 115VAC.Its physical measurement value is 8.83″(22.44 cm)x 3.34″(8.48 cm)x 3.91″(9.93 cm),weighing 4 pounds.(1.8 kg).This I/O module needs to be installed on an enclosure that provides sufficient protection for the device.The I/O module supports right side up and down mounting and must provide all aspects of a 2(2)inch gap to promote sufficient air flow and natural cooling.

　　The current source I/O block of General Electric IC660BA104 has a 1500 volt blocking isolation for 1 minute,1500 volt group to group isolation,and 1500 volt input channel to channel isolation.It is compatible with PCIM modules,Qbim modules,and all General Electric Genius Bus controllers.It has a programmable conversion time to combine the level of noise rejection and input resolution.Users can choose a longer conversion time to increase input resolution.The independent output circuit is isolated from all other circuits within the block.The output channel uses a dual 12 bit digital to analog converter,while the control current is independent within the range of 0 to 240000 amperes.The current source I/O block of IC660BA104 with a handheld monitor can be easily configured by entering the device number/serial bus address and reference number.When the block is configured offline,make sure to connect a 75 ohm resistor to the serial 1 and 2 terminals.

　　Technical specifications

　　Scale voltage:115 VAC/125 VDC

　　Points:4 inputs/2 outputs

　　Input range:4 to 20 horses

　　Output range:4 to 20 horses

　　Working voltage:93-132 VAC/105-145 VDC

　　Common points:1 set of 4 inputs and 1 set of 2 outputs

　　Application field

　　IC660BBA104 is commonly used in industries such as manufacturing,automation,and process control.