GE IC697PWR711

Description

GE IC697PWR711 is a power module for GE Fanuc(now GE Automation)90-30 series programmable logic controllers(PLCs).The following is a detailed introduction to the product:

I.Product Overview

The GE IC697PWR711 power module is designed to provide stable and reliable power supply for the GE 90-30 series PLCs.It is installed in the leftmost position of the 90-30 rack and connects to other modules through a 48-pin backplane connector.The power module has a variety of output voltage and current specifications to meet the needs of different PLC systems.

GE IC697PWR711

II.Main Features

Input voltage compatibility:

The IC697PWR711 power module supports optional input voltages such as 120 VAC and 240 VAC,which are determined by external jumper settings.

For these two nominal input voltages,the applicable voltage range is 90 to 132 VAC or 180 to 264 VAC,and the frequency is 47 to 63 Hz.

Output Voltage and Current:

The power module provides output voltages of+5VDC,12VDC,and-12VDC.

The maximum output current is 18 amps for+5VDC(up to 20 amps in some cases),2 amps for+12VDC,and 1 amp for-12VDC.

Power Capacity and Expandability:

The total power capacity of the IC697PWR711 is 100 watts.

It can power not only the first rack,but also the second rack(if the total load is within the power supply rating),but the second rack must be less than 5.2 amps and a 3-foot connecting cable is required.

Protection Features:

The power module has internal electronic short-circuit and overcurrent protection.

For branch circuit fuses,an external switch of appropriate size must be installed.

Other Features:

The IC697PWR711 has an ON/OFF switch to put the power supply in active operation.

It adopts a slide-in rack structure for easy installation and maintenance.

The power module also includes a power factor correction function when operating under AC voltage.

GE IC697PWR711

III.Application Environment

Temperature:

The IC697PWR711 power module should be operated at a temperature below 60 degrees Celsius to ensure its performance and reliability.

Line Voltage:

When operating continuously(for more than one hour)under low line voltage and high temperature conditions,power derating must be performed to prevent overheating or damage to the power module.

IV.Installation and Maintenance

Installation:

Install the IC697PWR711 power module in the leftmost slot of the 90-30 rack and connect it to other modules through the 48-pin backplane connector.

Ensure the correct connection of the connecting cable and power cord,and check whether all connections are firm and reliable.

Maintenance:

Regularly check the operating status of the power module,including whether the voltage and current output are normal,whether there is overheating or abnormal sound,etc.

If any problems or abnormal phenomena are found,the machine should be stopped immediately for inspection and contact professional maintenance personnel for repair or replacement.

The company mainly imports PLC modules,programmable controllers,servo control systems and DCS spare parts,such as:ABB,AB(Rockwell),GE(General Electric),Bentley,Honeywell Er),Emerson.),Motorola,Invensys,Westinghouse,etc.The company has established close cooperative relations with many world-renowned PLC and DCS product maintenance service providers.We can purchase goods directly from abroad and provide equipment and spare parts from different countries and manufacturers.

We supply goods directly from abroad,without intermediaries,reducing the cost of use.

There is really no medium that can make a difference!!

Shenzhen Changxin Automation-sufficient supply,large spot quantity,guaranteed quality,you can buy with confidence and use with peace of mind~!

If you have any defects or needs for imported PLC and DCS spare parts,please contact our team,we will help you find reliable and high-quality products super quickly,while shortening delivery time to ensure that your equipment can operate normally in the right environment.Just in time.

Professionally provide:PLC programmable control system,distributed control system(DCS),safety instrument system(SIS),ESD system,vibration monitoring system,turbo compressor unit control system(CCS)and other PLC modules,various industrial control systems,system modules,CPU,IO module,DO module,AI module,DI module,network communication module,Ethernet module,motion controller,analog input module,analog output module,digital input module,digital output module,module redundancy,power module,relay output unit,relay input unit,processor unit.

Products are widely used in:electricity,petroleum,mine hoisting,ports,heating,gas,water supply,sewage treatment,metallurgy,papermaking,textile,chemical industry,water conservancy and other modern industrial fields!

1.”Power plant DCS monitoring system”

2.”Intelligent flat tempering furnace system manufacturing”

3.”PLC programmable transmission control system”

4.”DCS distributed control system”

5.”Intelligent fire water suppl