GE IC695CRU32

Description

GE IC695CRU320 is a programmable automation controller(PAC)manufactured by General Electric(GE)and belongs to the PACSystems RX3i product series.The following is a detailed introduction to the product:

1.Product characteristics

Redundant configuration:

The IC695CRU320 is particularly suitable for redundant or hot standby configurations.With this controller configuration,availability is significantly increased.

With two controller racks,the primary(active)and secondary(standby)racks have similar configuration capabilities.When a single rack fails,active controller responsibility is automatically transferred to the secondary(standby)rack or can be switched manually.

Controller switching is performed in a maximum of 1 logical scan,with a minimum switching time of 3.133 ms.

Processor performance:

Powered by Celeron M processor with 1GHz processing speed and 64MB user memory.

Supports up to IC695RMX128/228 simultaneous links and is capable of transmitting up to 2MB of data.

GE IC695CRU32

Memory and Storage:

Program storage is up to 64MB of battery-backed memory and 64MB of non-volatile flash user memory.

Up to 512 program blocks can be saved,and the size of each program block can be up to 128KB.

Communication capabilities:

There are two integrated serial ports on the module,supporting RS-232 and RS-485 communication respectively.

Supports protocols such as Modbus RTU slave.

Ethernet communications are supported via rack-based Ethernet communications modules.

Power requirements:

Current requirements are 1 amp(3.3 Volts DC)and 1.2 amps(5 Volts DC).

Other features:

Supports Series 90-30 I/O modules for phased migration.

Mounted on the RX3i backplane,it mounts directly to a Peripheral Component Interconnect(PCI)slot,with connections to other modules on the bus also via PCI 2.2 or higher.

Equipped with memory error checking and correction(ECC)functions,single-bit correction and multi-bit checking.

2.Application scenarios

GE IC695CRU320 redundant processor is widely used in industrial automation,energy,transportation,water treatment and medical fields to ensure the stable operation of key systems.Specific application scenarios include:

Industrial Automation:In manufacturing and factory automation,redundant processors are often used to control and monitor production processes to ensure high system reliability and stability.

Energy industry:used in power generation and distribution systems to ensure the stability and reliability of the power grid.

Traffic system:In traffic control and monitoring systems,used to ensure the accuracy and reliability of traffic signals.

Water treatment and environmental protection:In water treatment plants and environmental protection facilities,used to monitor and control treatment processes to ensure compliance and efficiency.

Pharmaceutical and medical equipment:In pharmaceutical factories and medical equipment,used to control and monitor the production process to ensure product quality and safety.

GE IC695CRU32

3.Product advantages

High availability:Redundant configuration ensures that if one processor fails,the system can seamlessly switch to another processor.

High performance:Using high-speed processor and large-capacity memory to meet the needs of complex applications.

Easy to expand:supports modular expansion,allowing users to flexibly configure and expand according to system needs.

Industrial communication:It has a universal industrial communication interface,supports communication with other equipment and control systems,and is suitable for complex industrial network environments.

The company mainly imports PLC modules,programmable controllers,servo control systems and DCS spare parts,such as:ABB,AB(Rockwell),GE(General Electric),Bentley,Honeywell Er),Emerson.),Motorola,Invensys,Westinghouse,etc.The company has established close cooperative relations with many world-renowned PLC and DCS product maintenance service providers.We can purchase goods directly from abroad and provide equipment and spare parts from different countries and manufacturers.

We supply goods directly from abroad,without intermediaries,reducing the cost of use.

There is really no medium that can make a difference!!

Shenzhen Changxin Automation-sufficient supply,large spot quantity,guaranteed quality,you can buy with confidence and use with peace of mind~!

If you have any defects or needs for imported PLC and DCS spare parts,please contact our team,we will help you find reliable and high-quality products super quickly,while shortening delivery time to ensure that your equipment can operate normally in the right environment.Just in time.

Professionally provide:PLC programmable control system,distributed control system(DCS),safety instrument system(SIS),ESD system,vibration monitoring system,turbo compressor unit control system(CCS)and other PLC modules,various industrial control systems,system modules,CPU,IO module,DO module,AI module,DI module,network communication module,Ethernet module,motion controller,analog input module,analog output module,digital input module,digital output module,module redundancy,power module,relay output unit,relay input unit,processor unit.

Products are widely used in:electricity,petroleum,mine hoisting,ports,heating,gas,water supply,sewage treatment,metallurgy,papermaking,textile,chemical industry,water conservancy and other modern industrial fields!

1.”Power plant DCS monitoring system”

2.”Intelligent flat tempering furnace system manufacturing”

3.”PLC programmable transmission control system”

4.”DCS distributed control system”

5.”Intelligent fire water suppl