ABB PFEA112-20

Description

ABB PFEA112-20 is an industrial controller or amplifier produced by ABB with multiple functions and features.The following is a detailed introduction:

1.Product Overview

PFEA112-20 is a key component in ABB’s industrial automation system.It is based on the industry’s new high-speed DSP+IPM fully digital three-phase stepper motor driver architecture design,adds advanced fuzzy control algorithms,and is the fourth generation of stepper motor drivers.

2.Technical Specifications

Applicable motors:

Adaptive current:below 10.0A

Outer diameter:57~150mm

Torque:2NM~60NM

Applicable to 50V low-voltage motors to 300V high-voltage motors

Signal input:

Compatible with 5V,12V,and 24V signal inputs,no external current limiting resistors are required

Input control signals can be adaptive in the range of 5V to 24V

ABB PFEA112-20

Communication interface:

Supports 2MHz high-speed RS485 bus,making cascade interpolation control possible

Supports Profinet communication interface to achieve real-time data exchange with other devices

Digital I O:

The internal integrated 4-input and 2-output digital IO port can meet general motion control needs

Multi-point digital and analog IO components can be expanded

Positioning accuracy:up to 0.006 degrees

Response frequency:up to 500Kpps(or 200KHz,which may vary depending on the product version or application scenario)

Using voltage range:AC80V~230V(maximum withstand voltage is AC255V)

III.Functional features

Energy-saving operation mode:It can automatically run in energy-saving mode,provide normal and slow response speeds,save 40%energy when no load,and save 5%energy when loaded.

Analog closed-loop control system:In addition to the input and output of switch quantity,it also has analog input and output points,which can realize continuous adjustment and control of parameters such as temperature,flow,pressure,displacement,speed,etc.

Programmable logic controller(PLC):PFEA112-20 module controller is a type of PLC with modular design,allowing users to add various functions such as discrete and analog input and output,PID control,position control,motor control,serial communication and high-speed network.

Motion control function:Motion control function is integrated internally,supporting touch screen control and processing parameter reading.It can pre-install stamping and cutting system,automatic feeding and cutting system or customize any complex single-axis motion control function according to user needs.

High-precision positioning:high positioning accuracy,high subdivision accuracy,large high-speed torque,backward shift of the inflection point of loss of torsion,and stable operation at low speed.

IV.Application fields

PFEA112-20 can be widely used in many fields,including but not limited to:

Manufacturing:used for tension control on the production line to ensure product quality.

Printing industry:Control the tension of paper or other media during the printing process to ensure printing quality.

Packaging industry:Control the tension of materials during the packaging process to improve packaging efficiency and quality.

Textile industry:Used for tension control in the production process of textiles to ensure the quality and consistency of fabrics.

Mechanical processing industry:such as engraving machines,laser marking machines,wire stripping machines,winding machines,spring machines,CNC machine tools,etc.

Wind power industry:Provide wind power-specific drivers and provide corresponding solutions for yaw systems,climbing assistance systems,cabin cooling systems and variable pitch systems.

ABB PFEA112-20

5.Use and Maintenance

Installation:Install the amplifier in a suitable location to ensure good heat dissipation.

Wiring:Connect the power cord and motor wire,and pay attention to the correct wiring.

Configuration and debugging:Configure and debug through the amplifier’s human-machine interface or programming software,set motor parameters,motion control parameters,etc.

Performance test:Perform functional test and performance test to ensure the normal operation of the amplifier.

Regular maintenance:

Regularly check the appearance of the amplifier,connecting cables and motors to ensure normal operation.

Check whether the cooling fan and heat sink are clean to ensure good heat dissipation.

Regularly clean the amplifier’s housing and heat sink to ensure that there is no dust and debris accumulation.

The company mainly imports PLC modules,programmable controllers,servo control systems and DCS spare parts,such as:ABB,AB(Rockwell),GE(General Electric),Bentley,Honeywell Er),Emerson.),Motorola,Invensys,Westinghouse,etc.The company has established close cooperative relations with many world-renowned PLC and DCS product maintenance service providers.We can purchase goods directly from abroad and provide equipment and spare parts from different countries and manufacturers.

We supply goods directly from abroad,without intermediaries,reducing the cost of use.

There is really no medium that can make a difference!!

Shenzhen Changxin Automation-sufficient supply,large spot quantity,guaranteed quality,you can buy with confidence and use with peace of mind~!

If you have any defects or needs for imported PLC and DCS spare parts,please contact our team,we will help you find reliable and high-quality products super quickly,while shortening delivery time to ensure that your equipment can operate normally in the right environment.Just in time.

Professionally provide:PLC programmable control system,distributed control system(DCS),safety instrument system(SIS),ESD system,vibration monitoring system,turbo compressor unit control system(CCS)and other PLC modules,various industrial control systems,system modules,CPU,IO module,DO module,AI module,DI module,network communication module,Ethernet module,motion controller,analog input module,analog output module,digital input module,digital output module,module redundancy,power module,relay output unit,relay input unit,processor unit.

Products are widely used in:electricity,petroleum,mine hoisting,ports,heating,gas,water supply,sewage treatment,metallurgy,papermaking,textile,chemical industry,water conservancy and other modern industrial fields!

1.”Power plant DCS monitoring system”

2.”Intelligent flat tempering furnace system manufacturing”

3.”PLC programmable transmission control system”

4.”DCS distributed control system”

5.”Intelligent fire water suppl