A-B 1756-PA75

Product features

External power supply:The module must be powered by an external power supply to operate.

Hardware configuration:Hardware configuration is required to work properly.

Non-replaceable fuse:It has a non-replaceable fuse designed to prevent fire hazards caused by short circuits.

Applicable environment:Suitable for industrial environments with pollution degree 2 and excessive Class II applications(as defined in the IEC 60664-1 publication).

Altitude adaptability:It can operate at an altitude of up to 2000 meters without derating

Category:
Contact Us WhatsApp / Wechat:+8618150087953 / +86 18005022138
Phone:+86 18150087953 / +86 18005022138
Email:sales@cxplcmro.com

Description

A-B 1756-PA75,also known as Allen-Bradley 1756-PA75 or Rockwell 1756-PA75,is a ControlLogix power module produced by Allen-Bradley(now part of Rockwell Automation).The following is a detailed introduction to the module:

I.Product Overview

The 1756-PA75 is a standard power module that is mainly used to provide the necessary backplane power to various modules installed in the ControlLogix chassis.The module is installed on a dedicated power slot,usually on the far left of the ControlLogix chassis.

II.Technical Specifications

Input voltage:

85-265VAC(also said to be 85-264VAC),frequency is 47-63Hz.

The nominal input voltage is 120VAC/240VAC.

Output power:

The rated output power is 75W(also said to be rated output power up to 140W under certain conditions)in the temperature range of 0°C to+60°C(+32°F to+140°F).

Current capacity:

At 4.3VDC,the current capacity is 3A;

At 13.5VDC,the current capacity is 1A;

At 2V DC(some data are 24V DC or other values,which need to be determined according to the specific version),the current capacity is 8.24A or corresponding values.

A-B 1756-PA75

Compatibility:

Compatible with various ControlLogix chassis,such as 1756-A4,1756-A7,1756-A10,1756-A13,1756-A17,etc.,as well as B series and C series chassis.

Hold-up time:

If the working input power is suddenly interrupted,this standard power supply can provide a certain period of hold-up time,specifically:

2 cycles of hold-up time 85VAC,60 Hz;

6 cycles of hold-up time 120VAC,60 Hz;

20 cycles of hold-up time 220VAC,60 Hz.

Isolation voltage:

Rated at 250V(continuous),reinforced insulation type,power input to backplane type.

Test conditions:

Tested at 3500V DC for 60 seconds.

III.Product features

External power supply:The module must be powered by an external power supply to operate.

Hardware configuration:Hardware configuration is required to work properly.

Non-replaceable fuse:It has a non-replaceable fuse designed to prevent fire hazards caused by short circuits.

Applicable environment:Suitable for industrial environments with pollution degree 2 and excessive Class II applications(as defined in the IEC 60664-1 publication).

Altitude adaptability:It can operate at an altitude of up to 2000 meters without derating.

A-B 1756-PA75

IV.Application scenario

The 1756-PA75 power module is widely used in industrial automation systems,especially in servo motor applications that require high-precision position control,speed control or torque control.It can communicate with the servo motor drive,receive instructions from the PLC,and convert these instructions into signals that the servo motor can understand,thereby achieving precise control of the servo motor.

 

The company mainly imports PLC modules,programmable controllers,servo control systems and DCS spare parts,such as:ABB,AB(Rockwell),GE(General Electric),Bentley,Honeywell Er),Emerson.),Motorola,Invensys,Westinghouse,etc.The company has established close cooperative relations with many world-renowned PLC and DCS product maintenance service providers.We can purchase goods directly from abroad and provide equipment and spare parts from different countries and manufacturers.

We supply goods directly from abroad,without intermediaries,reducing the cost of use.

There is really no medium that can make a difference!!

Shenzhen Changxin Automation-sufficient supply,large spot quantity,guaranteed quality,you can buy with confidence and use with peace of mind~!

If you have any defects or needs for imported PLC and DCS spare parts,please contact our team,we will help you find reliable and high-quality products super quickly,while shortening delivery time to ensure that your equipment can operate normally in the right environment.Just in time.

Professionally provide:PLC programmable control system,distributed control system(DCS),safety instrument system(SIS),ESD system,vibration monitoring system,turbo compressor unit control system(CCS)and other PLC modules,various industrial control systems,system modules,CPU,IO module,DO module,AI module,DI module,network communication module,Ethernet module,motion controller,analog input module,analog output module,digital input module,digital output module,module redundancy,power module,relay output unit,relay input unit,processor unit.

Products are widely used in:electricity,petroleum,mine hoisting,ports,heating,gas,water supply,sewage treatment,metallurgy,papermaking,textile,chemical industry,water conservancy and other modern industrial fields!

1.”Power plant DCS monitoring system”

2.”Intelligent flat tempering furnace system manufacturing”

3.”PLC programmable transmission control system”

4.”DCS distributed control system”

5.”Intelligent fire water suppl

Contact Us WhatsApp / Wechat:+86 18150087953 / +86 18005022138
Phone:+86 18150087953 / +86 18005022138
Email:sales@cxplcmro.com