140CRP93100. SCHNEIDER

Description

• Product Name:
  Schneider Electric 140CRP93100 Residual Current Circuit Breaker (RCCB)
• Product Description:
  The Schneider Electric 140CRP93100 Residual Current Circuit Breaker (RCCB) is a safety device designed to protect people from electric shocks and reduce the risk of fire caused by earth faults in low-voltage AC power systems. It monitors the incoming and outgoing current in a circuit and trips the circuit if it detects a difference between the two, indicating the presence of a residual current (or earth leakage current) that could pose a safety hazard.
• Product Parameters:
  The key parameters of the Schneider Electric 140CRP93100 RCCB are as follows:
• Rated Residual Operating Current (IΔn): This parameter specifies the maximum residual current value at which the RCCB trips the circuit. It represents the sensitivity of the device to detect earth faults.
  Rated Current (In): The maximum continuous current rating that the RCCB can carry without tripping. It ensures compatibility with the normal load current of the electrical circuit.
  Voltage Rating (Un): The maximum voltage that the RCCB can safely handle. It ensures compatibility with the voltage requirements of the electrical system.
  Trip Time: This parameter specifies the maximum time taken by the RCCB to trip the circuit once the residual current exceeds the rated value. It provides information about the speed of response of the device.
  Number of Poles: The number of poles indicates the number of electrical connections (phases) that the RCCB has. Common pole configurations include single-pole, double-pole, and three-pole.
  Short-Circuit Capacity (Ics): The maximum short-circuit current that the RCCB can withstand without sustaining damage. It provides information about the fault current handling capability of the device.
• Product Specification:
  The specification of the Schneider Electric 140CRP93100 RCCB typically covers the following details:
• Trip Characteristic Curve: Illustrates the relationship between the residual current and the trip time of the RCCB. It provides information about the sensitivity and speed of response of the device.
  Protective Functions: The RCCB offers residual current protection to detect and interrupt earth faults, reducing the risk of electric shocks and fires.
  Certifications: The product may have met various safety certifications or standards, such as CE, UL, or IEC certifications. These certifications confirm that the product meets specific safety requirements and regulations.
  Dimensions and Mounting: The specification includes dimensions of the RCCB, as well as information about how it can be mounted or installed in the electrical panel or distribution board. This ensures proper installation and compatibility with the existing electrical infrastructure.
  Operating Conditions: Specifies the environmental conditions under which the RCCB can operate safely. This includes temperature range, humidity, and any other relevant environmental factors.
  Warranty Information: Details about the warranty provided by the manufacturer, covering the duration of the warranty, the scope of coverage, and any applicable service or support options.
• Please note that the actual product name, description, parameters, and specification may vary slightly from the information provided here. It is always recommended to refer to the manufacturer’s official documentation or product catalog for the most accurate and up-to-date product information.
•