140CRP312000. SCHNEIDER

Description

• Product Name:
  Schneider Electric 140CRP312000 Residual Current Circuit Breaker (RCCB)
• Product Description:
  The Schneider Electric 140CRP312000 Residual Current Circuit Breaker (RCCB) is an electrical safety device designed to protect people and equipment from the hazards caused by earth faults in low-voltage AC power systems. It continuously monitors the incoming and outgoing current in a circuit and trips the circuit when it detects a residual current above a predefined threshold, indicating the presence of a fault that could lead to electric shocks or fires. The 140CRP312000 RCCB offers enhanced personal and property safety for a wide range of applications.
• Product Parameters:
  The key parameters of the Schneider Electric 140CRP312000 RCCB are outlined below:
• Rated Residual Operating Current (IΔn): This parameter specifies the maximum residual current value at which the RCCB trips the circuit, ensuring sensitivity to earth faults.
  Rated Current (In): The maximum continuous current rating that the RCCB can carry without tripping, compatible with the normal load current of the electrical circuit.
  Voltage Rating (Un): The maximum voltage that the RCCB can safely handle, ensuring compatibility with the voltage requirements of the electrical system.
  Trip Time: The maximum time taken by the RCCB to trip the circuit once the residual current exceeds the rated value. This specifies the speed of the RCCB’s response to fault conditions.
  Number of Poles: The number of electrical connections (phases) that the RCCB has, such as single-pole, double-pole, or three-pole configurations.
  Short-Circuit Capacity (Ics): The maximum short-circuit current that the RCCB can withstand without sustaining damage, indicating its fault current handling capability.
• Product Specification:
  The specification of the Schneider Electric 140CRP312000 RCCB typically includes the following details:
• Trip Characteristic Curve: A curve that illustrates the relationship between the residual current and the trip time of the RCCB, providing information about its sensitivity and speed of response.
  Protective Functions: Details of the protective functions offered by the RCCB, specifically residual current protection to detect and interrupt earth faults, reducing the risk of electric shocks and fires.
  Certifications: Information on any safety certifications or standards that the product has met, such as CE, UL, or IEC certifications, confirming its compliance with specific safety requirements and regulations.
  Dimensions and Mounting: Specifications regarding the dimensions of the RCCB, as well as instructions on how it can be properly mounted or installed in the electrical panel or distribution board, ensuring compatibility with the existing electrical infrastructure.
  Operating Conditions: Details of the environmental conditions under which the RCCB can operate safely, including temperature range, humidity, and any other relevant factors that affect its performance.
  Warranty Information: Information about the warranty provided by the manufacturer, including the duration of the warranty, the scope of coverage, and any applicable service or support options available.
• Please note that the actual product name, description, parameters, and specification may vary slightly from the information provided here. It is always recommended to refer to the manufacturer’s official documentation or product catalog for the most accurate and up-to-date product information.
•