1C31113G02 may refer to an analog input electronic module.The following is a detailed introduction to the module:

1.Basic information

Brand:Emerson/Emerson,and some say it is Westinghouse/Westinghouse.

Model:1C31113G02

Purpose:Used to convert the analog output of transmitters such as temperature and pressure into digital signals,and send them to PLC or other control units for logical judgment or control.

2.Main technical indicators

Ambient temperature:-40~125℃

Power supply voltage:13~45V(or 60V,information from different sources may vary)

Load capacity:related to power supply voltage,specifically R=(U-12V)/0.02-r(U is power supply voltage,r is cable resistance)

Measurement medium:various gases and liquids that can coexist with AL2O3

Stability:≤0.2%FS/year

Pressure interface thread:standard M20×1.5,or as required by the user

Overload capacity:300%of full scale

Vibration influence:for 10g peak,10Hz~1KHz mechanical vibration,the output change is less than 0.1%

3.Product features

May be equipped with a large LCD display,which can directly read the measured value or curve(this feature may vary depending on the specific product).

May have storage interfaces such as Bluetooth,USB,SD(this feature may vary depending on the specific product).

Mercury-free design,environmentally friendly.

Can be remotely operated or controlled.

Each sample(or measurement point)may be programmed to run independently.

A wear-free inductive stirring system or other advanced technologies may be used(this feature may vary depending on the specific application scenario).

IV.Application Fields

1C31113G02 analog input electronic module may be widely used in industrial automation,process control,environmental monitoring and other fields,especially in situations where high-precision analog input is required.

 

The company mainly imports PLC modules,programmable controllers,servo control systems and DCS spare parts,such as:ABB,AB(Rockwell),GE(General Electric),Bentley,Honeywell Er),Emerson.),Motorola,Invensys,Westinghouse,etc.The company has established close cooperative relations with many world-renowned PLC and DCS product maintenance service providers.We can purchase goods directly from abroad and provide equipment and spare parts from different countries and manufacturers.

We supply goods directly from abroad,without intermediaries,reducing the cost of use.

There is really no medium that can make a difference!!

Shenzhen Changxin Automation-sufficient supply,large spot quantity,guaranteed quality,you can buy with confidence and use with peace of mind~!

If you have any defects or needs for imported PLC and DCS spare parts,please contact our team,we will help you find reliable and high-quality products super quickly,while shortening delivery time to ensure that your equipment can operate normally in the right environment.Just in time.

Professionally provide:PLC programmable control system,distributed control system(DCS),safety instrument system(SIS),ESD system,vibration monitoring system,turbo compressor unit control system(CCS)and other PLC modules,various industrial control systems,system modules,CPU,IO module,DO module,AI module,DI module,network communication module,Ethernet module,motion controller,analog input module,analog output module,digital input module,digital output module,module redundancy,power module,relay output unit,relay input unit,processor unit.

Products are widely used in:electricity,petroleum,mine hoisting,ports,heating,gas,water supply,sewage treatment,metallurgy,papermaking,textile,chemical industry,water conservancy and other modern industrial fields!

1.”Power plant DCS monitoring system”

2.”Intelligent flat tempering furnace system manufacturing”

3.”PLC programmable transmission control system”

4.”DCS distributed control system”

5.”Intelligent fire water suppl