ABB TC520 3BSE001449R1 is a product produced by ABB Group.The following is a detailed introduction to the product:

1.Product Overview

ABB TC520 3BSE001449R1 is a powerful thermocouple module that provides interfaces for data configuration and integration into turnkey solutions.This product is widely used in industrial automation and control systems,especially in environments where temperature needs to be accurately measured and controlled.

2.Main Features

Multi-protocol support:ABB TC520 3BSE001449R1 supports multiple communication protocols such as HART,Foundation Fieldbus and PROFIBUS PA,enabling it to communicate and exchange data with a variety of field devices.

High performance:This thermocouple module has high-performance data processing capabilities,can accurately measure and record temperature data in real time,and provide reliable data support for industrial automation systems.

Easy to integrate:ABB TC520 3BSE001449R1 provides a wealth of interface options,allowing it to be easily integrated into various industrial automation and control systems to meet the different needs of users.

Safety:The product has obtained IECEx and ATEX certification(ATmosphères EXplosibles),as well as Ex certification for Zone 1 and Zone 2,indicating that it is suitable for deployment in explosion-hazardous areas and has high safety.

3.Technical specifications

Regarding the specific technical specifications of ABB TC520 3BSE001449R1,it may vary depending on the product version or configuration.The following are some possible technical specifications(for reference only,please refer to the official documents for details):

Processor:Onboard Centrino low-power Pentium M/Celeron M processor.

Front-end bus frequency:400/533MHz.

System memory:1 184 pins DIMM slot,supporting 200/266/333MHz DDR SDRAM.

BIOS:2/4M Phoenix Flash BIOS,plug and play.

I/O interface:including IDE interface,serial port,parallel port,USB interface,PS/2 interface,infrared interface and network interface,etc.

Physical parameters:Dimensions(L×W)are 170mm×170mm,operating temperature range is 0℃～60℃,relative humidity range is 5%～90%(non-condensing).

IV.Application fields

ABB TC520 3BSE001449R1 is widely used in the following fields:

Petrochemical:In the petrochemical industry,temperature measurement and control are crucial.ABB TC520 3BSE001449R1 can accurately measure the temperature of various media and provide reliable data support for the production process.

Power:In the power industry,temperature monitoring is crucial to ensure the safe operation of equipment.This product can monitor the temperature of power equipment in real time to prevent equipment overheating and failure.

Metallurgy:In the metallurgical industry,temperature measurement and control in high temperature environments are crucial to ensure product quality and production efficiency.ABB TC520 3BSE001449R1 can work stably in high temperature environments and provide accurate temperature data.

Other industrial automation fields:This product is also widely used in other industrial automation fields,such as machinery manufacturing,food processing,etc.,providing reliable temperature measurement and control support for various industrial automation systems.

5.Use and maintenance

Installation:When installing ABB TC520 3BSE001449R1,please make sure to follow the installation guide in the product manual to ensure that the module is correctly connected and fixed.

Configuration:According to actual needs,use the programming tools or software provided by ABB to configure and program the module.This includes setting communication parameters,temperature measurement range,etc.

Maintenance:Regularly check the operating status of the module,clean dust and dirt in time,and maintain a good working environment for the module.At the same time,pay attention to check whether the connecting cables and interfaces are loose or damaged to ensure the stable operation of the module.

Fault handling:In case of module failure or abnormality,please contact ABB’s official or authorized maintenance center for repair or replacement in time.During the repair or replacement process,please follow the safety specifications and operating guidelines in the product manual.

 

The company mainly imports PLC modules,programmable controllers,servo control systems and DCS spare parts,such as:ABB,AB(Rockwell),GE(General Electric),Bentley,Honeywell Er),Emerson.),Motorola,Invensys,Westinghouse,etc.The company has established close cooperative relations with many world-renowned PLC and DCS product maintenance service providers.We can purchase goods directly from abroad and provide equipment and spare parts from different countries and manufacturers.

We supply goods directly from abroad,without intermediaries,reducing the cost of use.

There is really no medium that can make a difference!!

Shenzhen Changxin Automation-sufficient supply,large spot quantity,guaranteed quality,you can buy with confidence and use with peace of mind~!

If you have any defects or needs for imported PLC and DCS spare parts,please contact our team,we will help you find reliable and high-quality products super quickly,while shortening delivery time to ensure that your equipment can operate normally in the right environment.Just in time.

Professionally provide:PLC programmable control system,distributed control system(DCS),safety instrument system(SIS),ESD system,vibration monitoring system,turbo compressor unit control system(CCS)and other PLC modules,various industrial control systems,system modules,CPU,IO module,DO module,AI module,DI module,network communication module,Ethernet module,motion controller,analog input module,analog output module,digital input module,digital output module,module redundancy,power module,relay output unit,relay input unit,processor unit.

Products are widely used in:electricity,petroleum,mine hoisting,ports,heating,gas,water supply,sewage treatment,metallurgy,papermaking,textile,chemical industry,water conservancy and other modern industrial fields!

1.”Power plant DCS monitoring system”

2.”Intelligent flat tempering furnace system manufacturing”

3.”PLC programmable transmission control system”

4.”DCS distributed control system”

5.”Intelligent fire water suppl