IS200EGDMH1ADF GE Ground Detection Module

Product Description:

IS200EGDMH1ADF is an excitation field grounding detector module produced by General Electric.It is installed in the excitation control cabinet to detect the grounding of the excitation machine’s magnetic field.This module is used in conjunction with the EXAM module to determine the possibility of on-site ground leakage at any point on the DC or AC side.

Product parameters:

Input voltage range:12-48VDC

Output voltage range:5VDC

Output current:maximum 10A

Efficiency:greater than 90%

Size:170mm x 105mm x 32mm2 Weight:approximately 120g

Operating temperature:-20°C to+50°C

Storage temperature:-40°C to+70°C

Environmental humidity:5%to 95%relative humidity(without condensation)

CPU:32-bit RISC processor

Product specifications:

Stability:±0.1%

Sampling rate:1kHz

Response time:100us

Power noise:1V RMS

Output noise:0.1%RMS

Impedance:50Ω

Series:

This module belongs to GE’s EX2100 excitation controller series.

Features:

There are three LED indicators on the module,namely power indicator,activity indicator,and selective main indicator

Supports separate three-phase input voltage,with a nominal range of 480 VRMS

It can be connected to the EBKP backplane model,and the cable length of the connection board does not exceed 90 millimeters

The three screw connectors labeled TB1,TB2,and TB3 on the module are strictly used for voltage input

There are three 9-pin connectors on the module,namely J504,J509,and J514,used to connect the cables of the EBKP backplane of the EMIO board

Function and purpose:

The main function of IS200EGDMH1ADF is to detect the grounding of the excitation machine magnetic field and ensure the normal operation of the excitation system.When used in conjunction with the EXAM module,it can help determine the possibility of on-site ground leakage at any point on the DC or AC side.This is crucial for preventing equipment failures and maintaining system stability.

Application field:

This module is widely used in the field of industrial automation,such as robot control,industrial production line control,automated production equipment,etc.In addition,it can also be used for distributed control systems such as gas generator spare parts in DCS(distributed control system).