Description

GE IC695ETM001-EK is an Ethernet interface module.Here is a detailed introduction to the module:

1.Basic Information

Brand:GE(General Electric)

Model:IC695ETM001-EK

Series:RX3i

Features:Fast,efficient,reliable

GE IC695ETM001-EK

2.Technical Specifications

Ethernet Ports:2,auto-sensing 10Base-T/100Base-TX RJ-45 shielded twisted pair Ethernet ports for direct connection to 10Base-T or 100Base-TX IEEE 802.3 networks.

Transmission Rate:Supports 10/100 Mbps transmission rate and auto-negotiation function.

Ethernet Processor Speed:200 MHz.

Duplex Mode:Supports half-duplex and full-duplex modes.

Protocol Support:Supports TCP/IP protocol stack,and can execute Service Request Transport Protocol(SRTP),Modbus TCP,and Ethernet Global Data(EGD)protocols.

Serial interface:Provides RS-232 serial port,supports data rates from 1200 bps to 115200 bps(mentioned in some materials,but not all descriptions include this point).

III.Functions and applications

PAC system connection:This module can connect the PAC system(programmable automation controller system)to the Ethernet network to achieve communication with other controller platforms(such as 90 series and VersaMax controllers).

Data exchange:Supports regular data exchange through Ethernet global data(EGD),and executes EGD commands to read and write controllers.

Remote access and monitoring:Supports remote access and monitoring functions,and operators can connect to the control system through the network for diagnosis,monitoring and maintenance.

Time synchronization:Can be used for time synchronization with SNTP time servers on Ethernet TCP/IP.

Built-in station manager:Provides online monitoring access to the Ethernet interface and is managed through a dedicated Station Manager port.

GE IC695ETM001-EK

IV.Physical and compatibility

Dimensions:The specifications are 21*65*3(the unit is not clear,but it should be millimeters or similar units according to common understanding).

Color:Standard color.

Compatible Backplane:Compatible with IC695CHS007,CHS012 or CHS016 backplanes.

Hot-swap capability:Supports insertion under power,even when the processor is in RUN mode(requires firmware revision 2.51 to enable this feature).

The company mainly imports PLC modules,programmable controllers,servo control systems and DCS spare parts,such as:ABB,AB(Rockwell),GE(General Electric),Bentley,Honeywell Er),Emerson.),Motorola,Invensys,Westinghouse,etc.The company has established close cooperative relations with many world-renowned PLC and DCS product maintenance service providers.We can purchase goods directly from abroad and provide equipment and spare parts from different countries and manufacturers.
We supply goods directly from abroad,without intermediaries,reducing the cost of use.
There is really no medium that can make a difference!!
Shenzhen Changxin Automation-sufficient supply,large spot quantity,guaranteed quality,you can buy with confidence and use with peace of mind~!
If you have any defects or needs for imported PLC and DCS spare parts,please contact our team,we will help you find reliable and high-quality products super quickly,while shortening delivery time to ensure that your equipment can operate normally in the right environment.Just in time.
Professionally provide:PLC programmable control system,distributed control system(DCS),safety instrument system(SIS),ESD system,vibration monitoring system,turbo compressor unit control system(CCS)and other PLC modules,various industrial control systems,system modules,CPU,IO module,DO module,AI module,DI module,network communication module,Ethernet module,motion controller,analog input module,analog output module,digital input module,digital output module,module redundancy,power module,relay output unit,relay input unit,processor unit.
Products are widely used in:electricity,petroleum,mine hoisting,ports,heating,gas,water supply,sewage treatment,metallurgy,papermaking,textile,chemical industry,water conservancy and other modern industrial fields!
1.”Power plant DCS monitoring system”
2.”Intelligent flat tempering furnace system manufacturing”
3.”PLC programmable transmission control system”
4.”DCS distributed control system”
5.”Intelligent fire water supply”