IC660BBA104 6231BP10910 GE current source Analog I/O block

　　Product description

　　The IC660BBA104 is a current source analog I/O block that can be used in a variety of industrial applications.

　　trait

　　Reliable and accurate source of current

　　Wide range of current output options

　　Easy integration with existing systems

　　The GE FANUCIC60BA106 is a regular source analog input and output block.The module has a total of six(6)circuits consisting of four(4)4-20mA input channels and two(2)4-20mA output channels.It consists of a separate isolated input channel with 115VAC external supply voltage.

　　The IC660BBA104 is a stream source combination I/O block with six(6)input circuits,consisting of four(4)analog input channels,capable of receiving 4-20mA signals and two(2)output channels,transmitting 4-20mA signals.In addition,the module has input channels for packet isolation,packet isolation and packet isolation and is rated 1500V.

　　The specific features of the IC660BBA104 input channel are:full scale reading accuracy of 0.1%at 25 degrees Celsius,resolution of 16.6MS to 400MS for 1a,and user-configurable conversion time of 16.6M to 25 mA.Each input channel is designed with a single diagnosis,such as low/out of range,high/low alarm,and open line detection.

　　The IC60BBA104 output channel has an accuracy of 0.15%of the full-scale reading and a resolution of 6 times.The typical update frequency for each channel is 6 to 8M,over 0-24MA.Similar to input channels,each output channel is capable of internal diagnostics such as low distance,out of range,and feedback errors.

　　The external power supply for the IC660BBA104 is supplied by a nominal 115VAC input.It has a physical measurement of 8.83″(22.44 cm)x3.34″(8.48 cm)x3.91″(9.93 cm)and weighs 4 pounds.(1.8 kg).The I/O module needs to be mounted on a housing that provides adequate protection for the device.The block I/O supports right side up and down mounting and must provide 2(2)inch clearance on all sides to promote adequate air flow and natural cooling.

　　Ge IC660BA104 Current source I/O block has 1500 volt block isolation for 1 minute,1500 Volt group to group isolation,1500 Volt input channel to channel isolation.It is compatible with pcim modules,Qbim modules and all GE Genius Bus controllers.It has a programmable conversion time to combine the noise rejection level and resolution of the input.Users can choose longer conversion times to increase input resolution.The individual output circuit is isolated from all other circuits within the block.The output channels use dual 12-bit digital-to-analog converters,while the control currents are independent in the 0-240,000 amp range.The IC660BA104 current source I/O block with handheld monitor can be easily configured by entering the device number/serial bus address and reference number.When the block is configured offline,make sure to connect a 75 ohm resistor to the serial 1 and 2 terminals.

　　Technical specification

　　Scale voltage:115 VAC/125 VDC

　　Credit:4 inputs/2 outputs

　　Input range:4 horses to 20 horses

　　Output range:4 to 20 horses

　　Operating voltage:93-132 VAC/105-145 VDC

　　Common ground:1 set of 4 inputs and 1 set of 2 outputs

　　Application field

　　IC660BBA104 is commonly used in manufacturing,automation and process control industries.