Description

　　Product Description

　　3500/60 163179-01 Bently Temperature Monitor

　　Function:Monitor the temperature of rotating machinery

　　Purpose:Used for mechanical condition monitoring systems to prevent damage to rotating machinery caused by overheating

　　Features:

　　Six channel design,capable of simultaneously monitoring temperature at six points

　　High precision temperature measurement

　　Quick response

　　High reliability

　　Fully compatible with existing 3500 series modules

　　Product Description:

　　The 3500/60 163179-01 temperature monitor is a six channel module used to monitor the temperature of rotating machinery.The module receives input signals from thermocouples or resistance temperature detectors(RTDs),performs filtering,amplification,digitization,and other processing,and then outputs the digital signals to the monitor module in the 3500 rack.When the temperature exceeds the set value,the module will emit an alarm signal and can trigger protection actions,such as disconnecting the power or parking.

　　The 3500/60 module provides six temperature monitoring channels and accepts temperature inputs from resistance temperature detectors(RTDs)and thermocouples(TC).The module adjusts these inputs and compares them with user programmable alarm setpoints.

　　Users use 3500 rack configuration software to program modules for performing RTD or TC temperature measurements.Different I/O modules have either RTD/TC non isolated or TC isolated versions.Users can configure non isolated versions of RTD/TC to accept TC or RTD,or a mixture of TC and RTD inputs.The TC isolation type provides 250 Vdc channel to channel isolation to prevent external interference.

　　When used in a three module redundant(TMR)configuration,temperature monitors must be installed adjacent in groups of three.When used in this configuration,the system adopts two voting methods to ensure accuracy of operation and avoid single points of failure.

　　This module adopts a modular design,which is easy to install and maintain.Six LED indicators on the front panel of the module are used to indicate the signal status of each channel.There are two connectors on the back panel of the module,which are used to connect the temperature sensor and monitor module.

　　Product parameters:

　　Input signal:Analog signal from thermocouple or RTD

　　Input signal type:thermocouple,RTD

　　Input signal range:-200°C to 1200°C

　　Output signal:Digital signal

　　Sampling rate:1 Hz to 256 Hz

　　Resolution:16 bits

　　Power supply:24 V DC

　　Product specifications:

　　Dimensions:220 mm x 100 mm x 40 mm

　　Weight:0.5 kg

　　Application field:

　　Power industry:generators,steam turbines,water turbines,etc

　　Oil and gas industry:pumps,compressors,pipelines,etc

　　Chemical industry:pumps,compressors,mixers,etc

　　Metallurgical industry:rolling mills,continuous casting machines,etc

　　Paper industry:paper machines,pulp pumps,etc

3500/60 163179-01 BENTLY

3500/60 163179-01 BENTLY Temperature Monitor