1C31116G02 EMERSON

Description

• Product Name:
  Emerson 1C31116G02
• Product Description:
  The Emerson 1C31116G02 is a pressure switch, designed for use in industrial automation and process control systems. This switch acts as a safety device, monitoring pressure levels and activating an electrical switch when a preset pressure threshold is reached or exceeded. It is commonly used in applications where pressure must be maintained within a specific range to prevent equipment damage or safety hazards.
• Product Parameters:
• Set Point: The specific pressure value at which the switch activates, either opening or closing an electrical circuit.
  Switch Type: The type of switch action, such as normally open (NO) or normally closed (NC), indicating the electrical circuit’s state when the pressure switch is not activated.
  Operating Range: The minimum and maximum pressure values within which the switch can operate and reliably activate.
  Accuracy: The closeness of the set point to the actual pressure at which the switch activates.
  Response Time: The time taken by the pressure switch to respond to changes in pressure and activate the switch action.
  Electrical Ratings: The voltage and current ratings of the switch, indicating the electrical load it can safely handle.
  Process Connection: The type of connection used to interface the pressure switch with the process system, such as threaded or flanged connections.
• Product Specification:
• Physical Dimensions: Detailed dimensions of the Emerson 1C31116G02, including length, width, height, and any relevant mounting dimensions.
  Material of Construction: The materials used in the construction of the pressure switch, including those resistant to corrosion and other harsh environmental conditions.
  Operating Conditions: The temperature, humidity, and vibration ranges within which the product can operate without affecting its performance or reliability.
  Electrical Connections: Information on the type, configuration, and location of electrical connections, including wiring diagrams and connection instructions.
  Environmental Ratings: The Emerson 1C31116G02’s resistance to environmental factors such as dust, water ingress, and explosive atmospheres, indicated by relevant safety certifications and ratings.
  Compliance and Certifications: The product’s compliance with safety standards, environmental regulations, and other relevant industry requirements, including any certifications or approvals obtained.
  Technical Support and Documentation: Access to product manuals, installation instructions, software updates, and technical support services provided by Emerson for the 1C31116G02 pressure switch.
• For the most accurate and up-to-date information on the Emerson 1C31116G02 pressure switch, it is recommended to refer to the manufacturer’s official documentation or product catalog.
•